Georgia Wind Resource Map and Wind Potential Capacity
The U.S. Department of Energy's Wind Program and the National Renewable Energy Laboratory (NREL) published an 80-meter (m) height wind resource map for Georgia. This map is a key component of understanding the state's wind potential capacity from a development, policy, and a jobs and economic development impact perspective.
About the 80-Meter Georgia Wind Resource Map
The wind resource map shows the predicted mean annual wind speeds at an 80-m height, presented at a spatial resolution of about 2 kilometers that is interpolated to a finer scale for display. Areas with annual average wind speeds around 6.5 meters per second and greater at 80-m height are generally considered to have a resource suitable for wind development. Utility-scale, land-based wind turbines are typically installed between 80- and 100-m high although tower heights for new installations are increasing—up to 140 m—to gain access to better wind resources higher aloft.
The average wind speeds indicated on this map are model-derived estimates that may not represent the true wind resource at any given location. Small terrain features, vegetation, buildings, and atmospheric effects may cause the wind speed to depart from the map estimates. Anyone planning to estimate energy production potential should seek expert advice or detailed wind resource assessments.
Georgia Wind Potential Capacity
The wind potential capacity maps show land area with a gross capacity factor1 of 35% and higher, which may be suitable for wind energy development. AWS Truepower produced the wind resource data with a spatial resolution of 200-m, which was binned into 20-kilometer (km) grid cells. Map shading shows the amount of potentially developable area within each 20-km cell: the darker the color, the larger the potentially developable area within each cell. Areas that are excluded from development by law, such as wilderness areas and national parks, and other areas unlikely to be developed, such as urban areas and water bodies, have also been excluded. Wind potential capacity maps are provided for a current 2014 industry standard wind turbine installed on a 110-m tower, which represents plausible current technology options, and on a 140-m tower, which represents near-term future technology options.
Site evaluation for wind projects should be coordinated with appropriate authorities and should consider potential effects on local resources and land uses, including but not limited to impacts to wildlife, sound, the visual environment, radar, aviation, safety and other local priorities. Various federal agencies have authorities relating to the siting and permitting of wind plants, depending on the location and resources that might be affected. For example, potential impacts to air traffic and military missions are evaluated by the Federal Aviation Administration (FAA) and U.S. Department of Defense Siting Clearinghouse through the FAA's airspace obstruction evaluation process. Potential impacts to migratory birds and endangered species are evaluated by the U.S. Fish and Wildlife Service. Other federal agencies that may have a role include, but are not limited to, the U.S. Army Corps of Engineers for projects impacting wetlands and waterways and the Bureau of Land Management or U.S. Forest Service for projects on federal lands. Similar state, tribal, and local agencies may also have jurisdiction.
The chart shows another way to understand the wind potential capacity above a given gross capacity factor at 80-, 110-, and 140-m tower heights for Georgia. The table lists the estimates of land area with a gross capacity of 35% and greater at 80-, 110-, and 140-m heights and the wind potential capacity from development of the "available" land area after exclusions. In the table, "installed capacity" shows the potential megawatts of rated capacity that could be installed on the available land area. Areas excluded for wind development by law as well as urban areas and water bodies are not included (see Wind Resource Exclusion Table for more detail).
These maps and wind potential estimates resulted from a collaborative project between NREL and AWS Truepower. The U.S. Department of Energy's WINDExchange initiative supported these mapping efforts.
1. NREL assumed a 35% gross capacity factor, a measure of total energy produced compared to the wind turbines' rated nameplate capacity over a year, as the minimum energy production that may be suitable for development. Assuming 15% losses and a 35% gross capacity factor results in a net capacity factor of nearly 30%, which is the long-term historical average fleet-wide net capacity factors in the United States. (Wiser and Bolinger 2014)